~ mkfs
/.gdbinit
GDB init file which provides a Soft-ICE style interface. Originated in this forum thread: http://board.anticrack.de/viewforum.php?f=35
# .gdbinit : GDB Config file
#
# INSTRUCTIONS: save as ~/.gdbinit
#
# DESCRIPTION: A user-friendly gdb configuration file.
#
# REVISION : 6.1-color-user
#
# CONTRIBUTORS: mammon_, elaine, pusillus, mong, zhang le
#
# FEEDBACK: http://board.anticrack.de/viewforum.php?f=35
#
# NOTES: 'help user' in gdb will list the commands/descriptions in this file
# 'context on' now enables auto-display of context screen
#
# CHANGELOG:
# Version 6.1-color-user
# Took the Gentoo route and ran sed s/user/user/g
# Version 6.1-color
# Added color fixes from
# http://gnurbs.blogsome.com/2006/12/22/colorizing-mamons-gdbinit/
# Version 6.1
# fixed filename in step_to_call so it points to /dev/null
# changed location of logfiles from /tmp to ~
# Version 6
# added print_insn_type, get_insn_type, context-on, context-off commands
# added trace_calls, trace_run, step_to_call commands
# changed hook-stop so it checks $SHOW_CONTEXT variable
# Version 5
# added bpm, dump_bin, dump_hex, bp_alloc commands
# added 'assemble' by elaine, 'gas_asm' by mong
# added Tip Topics for aspiring users ;)
# Version 4
# added eflags-changing insns by pusillus
# added bp, nop, null, and int3 patch commands, also hook-stop
# Version 3
# incorporated elaine's if/else goodness into the hex/ascii dump
# Version 2
# radix bugfix by elaine
# TODO:
# * add global vars to allow user to control stack,data,code win sizes
# * add dump, append, set write, etc commands
# * more tips!
# ______________breakpoint aliases_____________
define bpl
info breakpoints
end
document bpl
List breakpoints
end
define bp
set $SHOW_CONTEXT = 1
break * $arg0
end
document bp
Set a breakpoint on address
Usage: bp addr
end
define bpc
clear $arg0
end
document bpc
Clear breakpoint at function/address
Usage: bpc addr
end
define bpe
enable $arg0
end
document bpe
Enable breakpoint #
Usage: bpe num
end
define bpd
disable $arg0
end
document bpd
Disable breakpoint #
Usage: bpd num
end
define bpt
set $SHOW_CONTEXT = 1
tbreak $arg0
end
document bpt
Set a temporary breakpoint on address
Usage: bpt addr
end
define bpm
set $SHOW_CONTEXT = 1
awatch $arg0
end
document bpm
Set a read/write breakpoint on address
Usage: bpm addr
end
define bhb
set $SHOW_CONTEXT = 1
break * $arg0
end
document bhb
Set Hardware Assisted breakpoint on address
Usage: bhb addr
end
# ______________process information____________
define argv
show args
end
document argv
Print program arguments
end
define stack
info stack
end
document stack
Print call stack
end
define frame
info frame
info args
info locals
end
document frame
Print stack frame
end
define flags
if (($eflags >> 0xB) & 1 )
printf "O "
else
printf "o "
end
if (($eflags >> 0xA) & 1 )
printf "D "
else
printf "d "
end
if (($eflags >> 9) & 1 )
printf "I "
else
printf "i "
end
if (($eflags >> 8) & 1 )
printf "T "
else
printf "t "
end
if (($eflags >> 7) & 1 )
printf "S "
else
printf "s "
end
if (($eflags >> 6) & 1 )
printf "Z "
else
printf "z "
end
if (($eflags >> 4) & 1 )
printf "A "
else
printf "a "
end
if (($eflags >> 2) & 1 )
printf "P "
else
printf "p "
end
if ($eflags & 1)
printf "C "
else
printf "c "
end
printf "\n"
end
document flags
Print flags register
end
define eflags
printf " OF <%d> DF <%d> IF <%d> TF <%d>",\
(($eflags >> 0xB) & 1 ), (($eflags >> 0xA) & 1 ), \
(($eflags >> 9) & 1 ), (($eflags >> 8) & 1 )
printf " SF <%d> ZF <%d> AF <%d> PF <%d> CF <%d>\n",\
(($eflags >> 7) & 1 ), (($eflags >> 6) & 1 ),\
(($eflags >> 4) & 1 ), (($eflags >> 2) & 1 ), ($eflags & 1)
printf " ID <%d> VIP <%d> VIF <%d> AC <%d>",\
(($eflags >> 0x15) & 1 ), (($eflags >> 0x14) & 1 ), \
(($eflags >> 0x13) & 1 ), (($eflags >> 0x12) & 1 )
printf " VM <%d> RF <%d> NT <%d> IOPL <%d>\n",\
(($eflags >> 0x11) & 1 ), (($eflags >> 0x10) & 1 ),\
(($eflags >> 0xE) & 1 ), (($eflags >> 0xC) & 3 )
end
document eflags
Print entire eflags register
end
define reg
printf " eax:%08X ebx:%08X ecx:%08X ", $eax, $ebx, $ecx
printf " edx:%08X eflags:%08X\n", $edx, $eflags
printf " esi:%08X edi:%08X esp:%08X ", $esi, $edi, $esp
printf " ebp:%08X eip:%08X\n", $ebp, $eip
printf " cs:%04X ds:%04X es:%04X", $cs, $ds, $es
printf " fs:%04X gs:%04X ss:%04X ", $fs, $gs, $ss
echo \033[31m
flags
echo \033[0m
end
document reg
Print CPU registers
end
define func
info functions
end
document func
Print functions in target
end
define var
info variables
end
document var
Print variables (symbols) in target
end
define lib
info sharedlibrary
end
document lib
Print shared libraries linked to target
end
define sig
info signals
end
document sig
Print signal actions for target
end
define thread
info threads
end
document thread
Print threads in target
end
define u
info udot
end
document u
Print kernel 'user' struct for target
end
define dis
disassemble $arg0
end
document dis
Disassemble address
Usage: dis addr
end
# ________________hex/ascii dump an address______________
define ascii_char
# thanks elaine :)
set $_c=*(unsigned char *)($arg0)
if ( $_c < 0x20 || $_c > 0x7E )
printf "."
else
printf "%c", $_c
end
end
document ascii_char
Print the ASCII value of arg0 or '.' if value is unprintable
end
define hex_quad
printf "%02X %02X %02X %02X %02X %02X %02X %02X", \
*(unsigned char*)($arg0), *(unsigned char*)($arg0 + 1), \
*(unsigned char*)($arg0 + 2), *(unsigned char*)($arg0 + 3), \
*(unsigned char*)($arg0 + 4), *(unsigned char*)($arg0 + 5), \
*(unsigned char*)($arg0 + 6), *(unsigned char*)($arg0 + 7)
end
document hex_quad
Print eight hexadecimal bytes starting at arg0
end
define hexdump
printf "%08X : ", $arg0
hex_quad $arg0
printf " - "
hex_quad ($arg0+8)
printf " "
ascii_char ($arg0)
ascii_char ($arg0+1)
ascii_char ($arg0+2)
ascii_char ($arg0+3)
ascii_char ($arg0+4)
ascii_char ($arg0+5)
ascii_char ($arg0+6)
ascii_char ($arg0+7)
ascii_char ($arg0+8)
ascii_char ($arg0+9)
ascii_char ($arg0+0xA)
ascii_char ($arg0+0xB)
ascii_char ($arg0+0xC)
ascii_char ($arg0+0xD)
ascii_char ($arg0+0xE)
ascii_char ($arg0+0xF)
printf "\n"
end
document hexdump
Display a 16-byte hex/ASCII dump of arg0
end
# ________________data window__________________
define ddump
echo \033[36m
printf "[%04X:%08X]------------------------", $ds, $data_addr
printf "---------------------------------[ data]\n"
echo \033[34m
set $_count=0
while ( $_count < $arg0 )
set $_i=($_count*0x10)
hexdump ($data_addr+$_i)
set $_count++
end
end
document ddump
Display $arg0 lines of hexdump for address $data_addr
end
define dd
if ( ($arg0 & 0x40000000) || ($arg0 & 0x08000000) || ($arg0 & 0xBF000000) )
set $data_addr=$arg0
ddump 0x10
else
printf "Invalid address: %08X\n", $arg0
end
end
document dd
Display 16 lines of a hex dump for $arg0
end
define datawin
if ( ($esi & 0x40000000) || ($esi & 0x08000000) || ($esi & 0xBF000000) )
set $data_addr=$esi
else
if ( ($edi & 0x40000000) || ($edi & 0x08000000) || ($edi & 0xBF000000) )
set $data_addr=$edi
else
if ( ($eax & 0x40000000) || ($eax & 0x08000000) || \
($eax & 0xBF000000) )
set $data_addr=$eax
else
set $data_addr=$esp
end
end
end
ddump 2
end
document datawin
Display esi, edi, eax, or esp in data window
end
# ________________process context______________
define context
echo \033[\033[36m\033]
printf "----------------------------------------"
printf "---------------------------------[ regs]\n"
echo \033[32m
reg
echo \033[36m
printf "[%04X:%08X]------------------------", $ss, $esp
printf "---------------------------------[stack]\n"
echo \033[34m
hexdump $sp+0x30
hexdump $sp+0x20
hexdump $sp+0x10
hexdump $sp
datawin
echo \033[36m
printf "[%04X:%08X]------------------------", $cs, $eip
printf "---------------------------------[ code]\n"
echo \033[37m
x /6i $pc
echo \033[36m
printf "---------------------------------------"
printf "----------------------------------------\n"
echo \033[0m
end
document context
Print regs, stack, ds:esi, and disassemble cs:eip
end
define context-on
set $SHOW_CONTEXT = 1
end
document context-on
Enable display of context on every program stop
end
define context-off
set $SHOW_CONTEXT = 1
end
document context-on
Disable display of context on every program stop
end
# ________________process control______________
define n
ni
end
document n
Step one instruction
end
define go
stepi $arg0
end
document go
Step # instructions
end
define pret
finish
end
document pret
Step out of current call
end
define init
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
tbreak _init
r
end
document init
Run program; break on _init()
end
define start
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
tbreak _start
r
end
document start
Run program; break on _start()
end
define sstart
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
tbreak __libc_start_main
r
end
document sstart
Run program; break on __libc_start_main(). Useful for stripped executables.
end
define main
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
tbreak main
r
end
document main
Run program; break on main()
end
# ________________eflags commands_______________
define cfc
if ($eflags & 1)
set $eflags = $eflags&~1
else
set $eflags = $eflags|1
end
end
document cfc
change Carry Flag
end
define cfp
if (($eflags >> 2) & 1 )
set $eflags = $eflags&~0x4
else
set $eflags = $eflags|0x4
end
end
document cfp
change Carry Flag
end
define cfa
if (($eflags >> 4) & 1 )
set $eflags = $eflags&~0x10
else
set $eflags = $eflags|0x10
end
end
document cfa
change Auxiliary Carry Flag
end
define cfz
if (($eflags >> 6) & 1 )
set $eflags = $eflags&~0x40
else
set $eflags = $eflags|0x40
end
end
document cfz
change Zero Flag
end
define cfs
if (($eflags >> 7) & 1 )
set $eflags = $eflags&~0x80
else
set $eflags = $eflags|0x80
end
end
document cfs
change Sign Flag
end
define cft
if (($eflags >>8) & 1 )
set $eflags = $eflags&100
else
set $eflags = $eflags|100
end
end
document cft
change Trap Flag
end
define cfi
if (($eflags >> 9) & 1 )
set $eflags = $eflags&~0x200
else
set $eflags = $eflags|0x200
end
end
document cfi
change Interrupt Flag
end
define cfd
if (($eflags >>0xA ) & 1 )
set $eflags = $eflags&~0x400
else
set $eflags = $eflags|0x400
end
end
document cfd
change Direction Flag
end
define cfo
if (($eflags >> 0xB) & 1 )
set $eflags = $eflags&~0x800
else
set $eflags = $eflags|0x800
end
end
document cfo
change Overflow Flag
end
# --------------------patch---------------------
define nop
set * (unsigned char *) $arg0 = 0x90
end
document nop
Patch byte at address arg0 to a NOP insn
Usage: nop addr
end
define null
set * (unsigned char *) $arg0 = 0
end
document null
Patch byte at address arg0 to NULL
Usage: null addr
end
define int3
set * (unsigned char *) $arg0 = 0xCC
end
document int3
Patch byte at address arg0 to an INT3 insn
Usage: int3 addr
end
# --------------------cflow---------------------
define print_insn_type
if ($arg0 == 0)
printf "UNKNOWN";
end
if ($arg0 == 1)
printf "JMP";
end
if ($arg0 == 2)
printf "JCC";
end
if ($arg0 == 3)
printf "CALL";
end
if ($arg0 == 4)
printf "RET";
end
if ($arg0 == 5)
printf "INT";
end
end
document print_insn_type
This prints the human-readable mnemonic for the instruction typed passed as
a parameter (usually $INSN_TYPE).
end
define get_insn_type
set $INSN_TYPE = 0
set $_byte1=*(unsigned char *)$arg0
if ($_byte1 == 0x9A || $_byte1 == 0xE8 )
# "call"
set $INSN_TYPE=3
end
if ($_byte1 >= 0xE9 && $_byte1 <= 0xEB)
# "jmp"
set $INSN_TYPE=1
end
if ($_byte1 >= 0x70 && $_byte1 <= 0x7F)
# "jcc"
set $INSN_TYPE=2
end
if ($_byte1 >= 0xE0 && $_byte1 <= 0xE3 )
# "jcc"
set $INSN_TYPE=2
end
if ($_byte1 == 0xC2 || $_byte1 == 0xC3 || $_byte1 == 0xCA || $_byte1 == 0xCB || $_byte1 == 0xCF)
# "ret"
set $INSN_TYPE=4
end
if ($_byte1 >= 0xCC && $_byte1 <= 0xCE)
# "int"
set $INSN_TYPE=5
end
if ($_byte1 == 0x0F )
# two-byte opcode
set $_byte2=*(unsigned char *)($arg0 +1)
if ($_byte2 >= 0x80 && $_byte2 <= 0x8F)
# "jcc"
set $INSN_TYPE=2
end
end
if ($_byte1 == 0xFF )
# opcode extension
set $_byte2=*(unsigned char *)($arg0 +1)
set $_opext=($_byte2 & 0x38)
if ($_opext == 0x10 || $_opext == 0x18)
# "call"
set $INSN_TYPE=3
end
if ($_opext == 0x20 || $_opext == 0x28)
# "jmp"
set $INSN_TYPE=1
end
end
end
document get_insn_type
This takes an address as a parameter and sets the global $INSN_TYPE variable
to 0, 1, 2, 3, 4, 5 if the instruction at the address is unknown, a jump,
a conditional jump, a call, a return, or an interrupt.
end
define step_to_call
set $_saved_ctx = $SHOW_CONTEXT
set $SHOW_CONTEXT = 0
set $SHOW_NEST_INSN=0
set logging file /dev/null
set logging on
set logging redirect on
set $_cont = 1
while ( $_cont > 0 )
stepi
get_insn_type $pc
if ($INSN_TYPE == 3)
set $_cont = 0
end
end
if ( $_saved_ctx > 0 )
context
else
x /i $pc
end
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
set logging redirect off
set logging off
set logging file gdb.txt
end
document step_to_call
This single steps until it encounters a call instruction; it stops before
the call is taken.
end
define trace_calls
set $SHOW_CONTEXT = 0
set $SHOW_NEST_INSN=0
set $_nest = 1
set listsize 0
set logging overwrite on
set logging file ~/gdb_trace_calls.txt
set logging on
set logging redirect on
while ( $_nest > 0 )
get_insn_type $pc
# handle nesting
if ($INSN_TYPE == 3)
set $_nest = $_nest + 1
else
if ($INSN_TYPE == 4)
set $_nest = $_nest - 1
end
end
# if a call, print it
if ($INSN_TYPE == 3)
set $x = $_nest
while ( $x > 0 )
printf "\t"
set $x = $x - 1
end
x /i $pc
end
#set logging file /dev/null
stepi
#set logging file ~/gdb_trace_calls.txt
end
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
set logging redirect off
set logging off
set logging file gdb.txt
# clean up trace file
shell grep -v ' at ' ~/gdb_trace_calls.txt > ~/gdb_trace_calls.1
shell grep -v ' in ' ~/gdb_trace_calls.1 > ~/gdb_trace_calls.txt
end
document trace_calls
Creates a runtime trace of the calls made target in ~/gdb_trace_calls.txt.
Note that this is very slow because gdb "set redirect on" does not work!
end
define trace_run
set $SHOW_CONTEXT = 0
set $SHOW_NEST_INSN=1
set logging overwrite on
set logging file ~/gdb_trace_run.txt
set logging on
set logging redirect on
set $_nest = 1
while ( $_nest > 0 )
get_insn_type $pc
# jmp, jcc, or cll
if ($INSN_TYPE == 3)
set $_nest = $_nest + 1
else
# ret
if ($INSN_TYPE == 4)
set $_nest = $_nest - 1
end
end
stepi
end
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
set logging file gdb.txt
set logging redirect off
set logging off
# clean up trace file
shell grep -v ' at ' ~/gdb_trace_run.txt > ~/gdb_trace_run.1
shell grep -v ' in ' ~/gdb_trace_run.1 > ~/gdb_trace_run.txt
end
document trace_run
Creates a runtime trace of the target in ~/gdb_trace_run.txt. Note
that this is very slow because gdb "set redirect on" does not work!
end
# _____________________misc_____________________
# this makes 'context' be called at every BP/step
define hook-stop
if ( $SHOW_CONTEXT > 0 )
context
end
if ( $SHOW_NEST_INSN > 0 )
set $x = $_nest
while ($x > 0 )
printf "\t"
set $x = $x - 1
end
end
end
define assemble
printf "Hit Ctrl-D to start, type code to assemble, hit Ctrl-D when done.\n"
printf "It is recommended to start with\n"
printf "\tBITS 32\n"
printf "Note that this command uses NASM (Intel syntax) to assemble.\n"
shell nasm -f bin -o /dev/stdout /dev/stdin | od -v -t x1 -w16 -A n
end
document assemble
Assemble Intel x86 instructions to binary opcodes. Uses nasm.
Usage: assemble
end
define gas_asm
printf "Type code to assemble, hit Ctrl-D until results appear :)\n"
printf "Note that this command uses GAS (AT&T syntax) to assemble.\n"
shell as -o ~/__gdb_tmp.bin
shell objdump -d -j .text --adjust-vma=$arg0 ~/__gdb_tmp.bin
shell rm ~/__gdb_tmp.bin
end
document gas_asm
Assemble Intel x86 instructions to binary opcodes using gas and objdump
Usage: gas_asm address
end
# !scary bp_alloc macro!
# The idea behind this macro is to break on the following code:
# 0x4008e0aa <malloc+6>: sub $0xc,%esp
# 0x4008e0ad <malloc+9>: call 0x4008e0b2 <malloc+14>
# 0x4008e0b2 <malloc+14>: pop %ebx
# 0x4008e0b3 <malloc+15>: add $0xa3f6e,%ebx
# At 0x4008e0b3, %ebx contains the address that has just been allocated
# The bp_alloc macro generates this breakpoint and *should* work for
# the forseeable future ... but if it breaks, set a breakpoint on
# __libc_malloc and look for where where the return value gets popped.
define bp_alloc
tbreak *(*__libc_malloc + F) if $ebx == $arg0
end
document bp_alloc
This sets a temporary breakpoint on the allocation of $arg0.
It works by setting a breakpoint on a specific address in __libc_malloc().
USE WITH CAUTION -- it is extremely platform dependent.
Usage: bp_alloc addr
end
define dump_hexfile
dump ihex memory $arg0 $arg1 $arg2
end
document dump_hexfile
Write a range of memory to a file in Intel ihex (hexdump) format.
Usage: dump_hexfile filename start_addr end_addr
end
define dump_binfile
dump memory $arg0 $arg1 $arg2
end
document dump_binfile
Write a range of memory to a binary file.
Usage: dump_binfile filename start_addr end_addr
end
# _________________user tips_________________
# The 'tips' command is used to provide tutorial-like info to the user
define tips
printf "Tip Topic Commands:\n"
printf "\ttip_display : Automatically display values on each break\n"
printf "\ttip_patch : Patching binaries\n"
printf "\ttip_strip : Dealing with stripped binaries\n"
printf "\ttip_syntax : ATT vs Intel syntax\n"
end
document tips
Provide a list of tips from users on various topics.
end
define tip_patch
printf "\n"
printf " PATCHING MEMORY\n"
printf "Any address can be patched using the 'set' command:\n"
printf "\t`set ADDR = VALUE` \te.g. `set *0x8049D6E = 0x90`\n"
printf "\n"
printf " PATCHING BINARY FILES\n"
printf "Use `set write` in order to patch the target executable\n"
printf "directly, instead of just patching memory.\n"
printf "\t`set write on` \t`set write off`\n"
printf "Note that this means any patches to the code or data segments\n"
printf "will be written to the executable file. When either of these\n"
printf "commands has been issued, the file must be reloaded.\n"
printf "\n"
end
document tip_patch
Tips on patching memory and binary files
end
define tip_strip
printf "\n"
printf " STOPPING BINARIES AT ENTRY POINT\n"
printf "Stripped binaries have no symbols, and are therefore tough to\n"
printf "start automatically. To debug a stripped binary, use\n"
printf "\tinfo file\n"
printf "to get the entry point of the file. The first few lines of\n"
printf "output will look like this:\n"
printf "\tSymbols from '/tmp/a.out'\n"
printf "\tLocal exec file:\n"
printf "\t `/tmp/a.out', file type elf32-i386.\n"
printf "\t Entry point: 0x80482e0\n"
printf "Use this entry point to set an entry point:\n"
printf "\t`tbreak *0x80482e0`\n"
printf "The breakpoint will delete itself after the program stops as\n"
printf "the entry point.\n"
printf "\n"
end
document tip_strip
Tips on dealing with stripped binaries
end
define tip_syntax
printf "\n"
printf "\t INTEL SYNTAX AT&T SYNTAX\n"
printf "\tmnemonic dest, src, imm mnemonic src, dest, imm\n"
printf "\t[base+index*scale+disp] disp(base, index, scale)\n"
printf "\tregister: eax register: %%eax\n"
printf "\timmediate: 0xFF immediate: $0xFF\n"
printf "\tdereference: [addr] dereference: addr(,1)\n"
printf "\tabsolute addr: addr absolute addr: *addr\n"
printf "\tbyte insn: mov byte ptr byte insn: movb\n"
printf "\tword insn: mov word ptr word insn: movw\n"
printf "\tdword insn: mov dword ptr dword insn: movd\n"
printf "\tfar call: call far far call: lcall\n"
printf "\tfar jump: jmp far far jump: ljmp\n"
printf "\n"
printf "Note that order of operands in reversed, and that AT&T syntax\n"
printf "requires that all instructions referencing memory operands \n"
printf "use an operand size suffix (b, w, d, q).\n"
printf "\n"
end
document tip_syntax
Summary of Intel and AT&T syntax differences
end
define tip_display
printf "\n"
printf "Any expression can be set to automatically be displayed every time\n"
printf "the target stops. The commands for this are:\n"
printf "\t`display expr' : automatically display expression 'expr'\n"
printf "\t`display' : show all displayed expressions\n"
printf "\t`undisplay num' : turn off autodisplay for expression # 'num'\n"
printf "Examples:\n"
printf "\t`display/x *(int *)$esp` : print top of stack\n"
printf "\t`display/x *(int *)($ebp+8)` : print first parameter\n"
printf "\t`display (char *)$esi` : print source string\n"
printf "\t`display (char *)$edi` : print destination string\n"
printf "\n"
end
document tip_display
Tips on automatically displaying values when a program stops.
end
# __________________gdb options_________________
set confirm off
set verbose off
set prompt \033[\033[31;m\033] gdb $ \033[0m
set output-radix 0x10
set input-radix 0x10
# These make gdb never pause in its output
set height 0
set width 0
# why do these not work???
set $SHOW_CONTEXT = 1
set $SHOW_NEST_INSN=0
set disassembly-flavor intel
#EOF